Industrial instrumentation · Est. 2014 · MSME & IEC registered
Catalogue · 55 products
55 products
II-FM-001 · FLOW
Variable area
DN10 – DN200
Variable-area flow measurement for almost any liquid or gas, including low flow and high-temperature media.
II-FM-002 · FLOW
Transit-time ultrasonic
IIT-200F
Transit-time flow and thermal energy measurement from DN15 to DN6000, clamp-on, insertion or inline.
II-FM-003 · FLOW
Ultrasonic time-difference
ZYLXUSD
Battery-powered ultrasonic water meter for DN50–DN200 pipelines, with remote meter reading.
II-FM-004 · FLOW
Ultrasonic, external sensors
RS485 · data logger
Ultrasonic flow meter with sensors fixed on the outside of the pipe, an LCD display, RS485 and data logging.
II-FM-005 · FLOW
Electromagnetic
Compact and remote converter
Electromagnetic flow meters for conductive liquids, listed with IP65 or IP68 housings, an LCD and 4–20 mA, RS485 or pulse outputs.
II-FM-006 · FLOW
Electromagnetic, insertion probe
Split converter · DN50 listing
An insertion electromagnetic meter with a separate converter, listed with 4–20 mA and RS485 outputs.
II-FM-007 · FLOW
Turbine
Stainless steel · 4–20 mA
Stainless-steel digital turbine flow meters with an LCD, 4–20 mA output (with HART on some listings) and custom diameters.
II-FM-008 · FLOW
Vortex shedding
Gas, air and steam
Digital vortex flow meters for gas, air and steam, listed with an LCD, RS232 or 4–20 mA output and a 0.01–10 m/s velocity span.
II-LT-001 · LEVEL
Guided-wave radar
70X series
Contact level measurement for liquids and solid powders in complex process conditions.
II-LT-002 · LEVEL
76–81 GHz FMCW radar
76–81 GHz
Non-contact level to 120 m with an 8 cm blind spot and a 3° beam.
II-LT-003 · LEVEL
Ultrasonic, non-contact
5 m – 25 m
Non-contact level with built-in LCD, 4–20 mA output and two-relay pump control on the four-wire model.
II-LT-004 · LEVEL
Ultrasonic, non-contact
Plastic housing · 4–20 mA
A plastic-housed ultrasonic level transmitter with an LCD and 4–20 mA output, listed for water treatment.
II-LT-005 · LEVEL
Ultrasonic, non-contact
IP67 · LCD
An ultrasonic level meter in a green, explosion-proof-described housing with an LCD, listed with IP67 and 0.5 % accuracy.
II-LT-006 · LEVEL
Hydrostatic (static pressure)
IP68 · stainless-steel probe
A one-piece stainless-steel submersible level probe on a vented cable, listed with IP68 protection.
II-LT-007 · LEVEL
Hydrostatic (static pressure)
Probe and display separate
Submersible level transmitters with the probe on a cable and the electronics or display mounted separately, listed in PTFE and standard versions.
II-LT-008 · LEVEL
Capacitive probe
IP66 · 4–20 mA
A rod-style capacitive level transmitter with 4–20 mA output and IP66 protection, listed for high-temperature and high-pressure liquids.
II-LT-009 · LEVEL
Magnetic float
0–6000 mm · IP65
A 304 stainless-steel float level gauge with 4–20 mA output, HART or RS485, IP65 protection and a 0–6000 mm span.
II-LT-010 · LEVEL
Radar, non-contact
Lens and flange antennas
A radar level gauge listed for 0–30 m with 2 mm accuracy, in an aluminium-alloy housing with stainless-steel parts.
II-PT-001 · PRESSURE
Monocrystalline silicon
IIT-2188-H · IIT-2188-G · IIT-3051DRG · IIT-3051DG · IIT-3051DP-SF
Gauge, vacuum, high-temperature and differential pressure transmitters with LCD and 4–20 mA + HART.
II-PT-002 · PRESSURE
Pressure transducer
IIT-2166-F
Compact 0–250 bar loop-powered transducer with braided cable, built for hydraulic service.
II-PT-003 · PRESSURE
Compact pressure transmitter
IIT-2166-H
Compact 0–10 bar transmitter without local display, for PLC, DCS and data-acquisition loops.
II-PT-004 · PRESSURE
Compact digital-circuit transmitter
With or without display
Small-body pressure transmitters in plain and display versions, 0–10 bar on the spec cards, with 4–20 mA output.
II-PT-005 · PRESSURE
Flush membrane, strain gauge
4–20 mA
Compact transmitters with a flush (membrane) sensing face, listed for automation and boiler duty with 4–20 mA output.
II-PT-006 · PRESSURE
Diffused silicon
304 stainless · IP67
Slim 304 stainless pressure transmitters on a cable lead, with 4–20 mA output and IP67 protection.
II-PT-007 · PRESSURE
Industrial field transmitter
Standard and high-temperature
Field-housing pressure transmitters in standard and high-temperature (finned) versions with 4–20 mA output.
II-PT-008 · PRESSURE
Monocrystalline silicon, HART
Includes ZT-3051-TDG
Smart pressure transmitters with 4–20 mA and HART output, a −1 to 600 bar span on one listing, and 0.075 % F.S. on the spec cards.
II-PT-009 · PRESSURE
Smart transmitter, digital outputs
4–20 mA · HART · Modbus RS485
A pressure transmitter with display, listed as explosion-proof with 4–20 mA, HART and Modbus RS485 outputs.
II-PT-010 · PRESSURE
Digital manometer
LCD · 0–10 bar
A battery-powered LCD pressure gauge, 0–10 bar and 0.25 % F.S. on the spec card.
II-PT-011 · PRESSURE
Diffused silicon, differential
Thread-in, two ports
A small diffused-silicon differential pressure transmitter with two threaded ports, 4–20 mA output and 0.25 % F.S. on the spec card.
II-PT-012 · PRESSURE
Silicon sensor, differential
ZT-3051-DP · IP65 / IP67
The ZT-3051-DP industrial differential pressure transmitter, with 4–20 mA output and IP65/IP67 housing, plus a single-crystal-silicon HART version.
II-PT-013 · PRESSURE
Diffused silicon, differential
ZT-2188-DP · 12–36 V DC
The ZT-2188-DP industrial differential pressure transmitter, 304 stainless, 12–36 V DC, with an LCD and 4–20 mA output.
II-PT-014 · PRESSURE
Diffused silicon, micro-differential
Duct and room pressure
A wall-mount micro-differential transmitter for air pressure, with an LCD, 4–20 mA or RS485 output and 0.5 % F.S. accuracy.
II-PT-015 · PRESSURE
Differential pressure controller / switch
ZT-3051-Tex · IP65 · LCD
The ZT-3051-Tex intelligent differential pressure controller and switch, with an LED/LCD display, 4–20 mA output and IP65 housing.
II-PT-016 · PRESSURE
Adjustable SPDT pressure control switch
P502 – P530M, P830 series
SPDT pressure controls with adjustable range and differential, in single and dual-pressure forms.
II-TT-001 · TEMPERATURE
PT100 sensing, armored lead
−200 to 500 °C · 4–20 mA
A temperature transmitter with an armored capillary lead, listed for −200 to 500 °C, 4–20 mA and 0.5 % F.S.
II-TT-002 · TEMPERATURE
RTD (PT100) or thermocouple input
Connection head · 4–20 mA
PT100 and universal RTD/thermocouple temperature transmitters in a connection head, with 4–20 mA output and ranges up to 0–1300 °C for K-type.
II-TT-003 · TEMPERATURE
PT100 / PT1000 / K thermocouple
Integrated probe · 4–20 mA
Integrated sensor-and-transmitter units in an explosion-proof-described housing, with PT100, PT1000 or K-type input and 4–20 mA output.
II-TT-004 · TEMPERATURE
RTD (PT100), digital display
4–20 mA · RS485 · HART
Probe-style temperature transmitters with an LCD or LED display, 4–20 mA output, and RS485 or HART listed on one version.
II-TT-005 · TEMPERATURE
Bimetal, dial indication
0–500 °C · 304 stainless
Stainless-steel bimetal dial thermometers for 0–500 °C, 1.6 % F.S. on the spec card, in angled and back-connected styles.
II-TT-006 · TEMPERATURE
Microcomputer controller
LCD · chiller water
A microcomputer digital thermostat and differential temperature controller with an LCD, listed for chilled-water duty.
II-HE-001 · ELECTRODES
Conductivity electrode
3D illustrationShort screw-in electrode for the PTFE-insulated, lower-pressure Hydrastep 459600802 position.
II-HE-002 · ELECTRODES
Conductivity electrode
3D illustrationScrew-in brazed-ceramic electrode for Hydrastep 459600602 and Levelstate Type 851 ports.
II-HE-003 · ELECTRODES
Conductivity electrode
3D illustrationLong ½-inch compression-nut electrode for Hydrastep 246781ZA and Levelstate Type 852 high-pressure columns.
II-HE-004 · ELECTRODES
Conductivity electrode
3D illustrationSupercritical-duty ½-inch compression-nut electrode for the Hydrastep 246781AB position.
II-HE-005 · ELECTRODES
Conductivity electrode
3D illustrationHigh-rating ¾-inch compression-nut electrode for the Hydrastep 246785A position.
II-HE-006 · ELECTRODES
Conductivity electrode
3D illustration¾-inch compression-nut electrode for the Hydrastep 246785Z position, for conventional high-pressure drums.
II-HE-007 · ELECTRODES
Conductivity electrode
3D illustrationClamp-plate electrode for Hydrastep 459600201, Levelstate Type 882 and BHEL Vision columns.
II-HE-008 · ELECTRODES
Conductivity electrode
3D illustrationLow-pressure M16 threaded electrode for Levelstate Type 811 (801LP) positions on Type 501 columns.
II-HE-009 · ELECTRODES
Conductivity electrode
3D illustrationStandard screw-in electrode for Levelstate Type 801 positions on Type 501 water columns.
II-HE-010 · ELECTRODES
Conductivity electrode
3D illustrationCompression-fitting electrode for Levelstate Type 802 positions on Type 502 water columns.
II-HE-011 · ELECTRODES
Conductivity electrode
3D illustrationClamp-plate electrode for Levelstate Type 803 positions on Type 503 water columns.
II-HE-012 · ELECTRODES
Conductivity electrode
3D illustration½-inch compression-nut electrode for Levelstate Type 862 positions, interchangeable with Fossil Power Systems 9300-0002.
II-HE-013 · ELECTRODES
Conductivity electrode
3D illustrationCompression-fitting electrode for Levelstate Type 871 positions, interchangeable with Clark Reliance RZ020BRZRK.
II-HE-014 · ELECTRODES
Conductivity electrode
3D illustrationClamp-nut electrode for Levelstate Type 872 positions, interchangeable with Clark Reliance RF031BRZRK.
II-HE-015 · ELECTRODES
PTFE-insulated, NPC-braided shielded instrumentation cable
3D illustration10-pair, AWG 20 (19/32 stranding)
10-pair PTFE/Teflon-insulated cable, individually and overall NPC-braid shielded, for wiring multiple conductivity probe electrodes back to the control panel.
Product sourcing
Not finding the instrument you need? Tell us what it is.
Send the specification, preferred make or an existing part number. The team will review it and confirm whether it can be supplied.
